Gold marker pen

Attention: open in a new window. E-mail

Friday, 10 May 2013

I have two cards for you this week that use the gold dazzle marker pen. It is one of those must-haves (along with the silver pen) as they add a touch extra to cards and are so affordable.

Thanks Card
This was made for me as a swap by a Hamilton demonstrator about 3 to 4 years ago. She has used a ton of different techniques to make a really stunning card. Note the gold pen around the edges.

Hi Beautiful!
I made this "make up set" punch art for a 14 year old girl's birthday. The gold marker was perfect for adding a fine edge around all the black containers and for highlights on the lipstick container.


Rhonda

 

New Ideas with Embossing Folders

Attention: open in a new window. E-mail

Wednesday, 01 May 2013

I was making some more punch art cards to show you this week and I wanted a large dotty background for my first card. As I don't have a large dotty background stamp, I decided to use my perfect polka dots embossing folder instead. I have seen this done before to emboss colour onto card but I didn't want any embossing, just the image only.
And it turned out great. Keep reading for steps on how to do this easy technique...

Sweet Friend Card
Beehive made from word window punch and bird wing.
Bee made from blossom petal builder punch (smallest petal) and itty bitty circle. Wings are the small heart cut in half.

Clucky Hen Card
This punch art was made from the bird punch for the head and wing and an extra large oval for the body.
The background for this card is an inked honeycomb embossing folder which has then been "stamped" or pressed onto white card.

Thanks So Much Card
This is one more sample of using an embossing folder like a stamp.

Here are the steps to creating this background:
1. Ink up the raised side of your embossing folder, that is the bottom side, without the stampin up logo on. Just tap your ink pad all over so that the raised portion of the embossing folder is coated in ink. Wipe away any visible ink that is on the folder but not on the raised portions.


2. Lay your embossing folder on a table with the inked raised side at the top and the deep grooved side at the bottom. Place your cardstock on the bottom, on the uninked side of the embossing folder. Bring the top down and press evenly all over with the palm of your hand to transfer the image.


3. Carefully lift the embossing folder up and take out your card. If you pressed firmly and evenly, it should look like this.
With a couple of tries you will know how much pressure to use. You don't want to press too hard as you don't want to emboss it. You just want to be firm enough to transfer the ink evenly.

Rhonda

 

Cards for boys

Attention: open in a new window. E-mail

Monday, 22 April 2013

Hi there,
I hope you are not sick of punch art yet as I have quite a bit more coming up this week and in the weeks ahead. Carrying on with the cards for kids, I have made some especially for the boys this week.

Birthday Bugs
I just purchased the spider web embossing folder and wanted to use it for a boy's card. I came up with a few different bugs and flies etc. They are all made using just two punches! The jewellery tag punch and the owl builder punch. All fairly easy to punch but fiddly to put together as there are so many little pieces.

Electric Guitar
Having guitar players in my family inpsired me to make this card. I have seen similar ones to this before. I made mine using the heart framelits from Stampin' Up! to create the body of the guitar and the decorative label punch (double punched) to make the head. The small tuners are made from the candle flame of the cupcake punch. The swirls on either side of the guitar body are made from the owl body (double punched). The neck of the guitar is just a strip of card.

 

Rhonda

 

Cards for little kids

Attention: open in a new window. E-mail

Friday, 12 April 2013

I had some spare time this week which was so nice and I spent a day in my craft room playing with my punches.
I decided to create some cards for little kids so that I had some to give away when the need arises.

These cards I made just for fun, using new and retired Stampin' Up! products...
you may recognise some of these television characters.

Wild About You & Hugs and Kisses
This top card you would have seen before as many people have made these characters using the scallop circle punch.
The bottom card is my impression of 'Ernie'.

Embellishments
I got a bit carried away making up these characters. Rather than make several cards with these characters, I made up an embellishment pack, now I can make them into cards or use on scrapbooking layouts later on.
The two easiest ones which I would definately make again were the frog and piggy. Both use the ornament punch as the base for the face. There are a couple of retired punches too but you could adapt and use the blossom petal builder punch instead, (for the piggy's ears and the frog's collar).

Happy Birthday Girl
This card has some retired cardstock on and a compass stamp from the 'sentimental journey' stamp set which was just perfect for this explorer girl. I tried out a new idea / technique for this punch art that I created. I wanted my punch art to look cartoony and so rather than sponge all the pieces to give definition, I drew around the edges with a marker pen.

Let me know what you think of this outling technique. Do you love it or hate it? Please leave a comment.
Thanks from Rhonda

 

 

Brayer Techniques

Attention: open in a new window. E-mail

Friday, 29 March 2013

You saw my bouncing brayer technique last week and as promised here is some more ideas for using your brayer this week.

For the Newlyweds
I don't use my brayer enough but it is a quick and easy way to add ink to small areas and particularly when brayering over embossed card, as it gives a great look.

This wedding card has 3 brayer techniques:

The heart image is heat embossed with white embossing powder on white card, then brayered over with chocolate chip ink. This technique is called emboss resist as the chocolate ink won't adhere to the glossy embossed image.

The pink pattern at the bottom is dry embossed with the vintage wallpaper embossing folder onto pink pirouette card, then brayered over with rich razzleberry ink. The ink mainly goes on the raised spots. This is quite a fun technique and you get different looks each time you do it, depending on how much ink you want to add on.

The third technique is to brayer colour on ribbon... My ribbon was white 1cm wide taffeta ribbon which I coloured in chocolate chip ink for this card.

Bird on a branch
This next card has a brayered background which is not easy to do (not for me anyway). You need to be patient and work slowly to achieve a smooth look. I tend to want to rush the process. There are some amazing demonstrators out there like Michelle Zindorf and Paula Dobson to name a couple who make this process look so easy but it's not! This is my feeble attempt. The ground underneath the trees was masked off and sponged but the rest of the background was brayered using pink pirouette, so saffron and more mustard inks.


Rhonda

 

 

Ideas for Easter

Attention: open in a new window. E-mail

Friday, 15 March 2013

Cute Chicks Easter Boxes
These wee gift boxes are quick and easy to make using the milk carton die. All the cutting and scoring is done for you when you use this die. I also used the windows framelit to cut two windows. These were covered with a piece of clear acetate. Stamp and decorate your boxes as desired. I used the owl punch to make Easter chicks. The mini wooden pegs are from a dollar save store.

Oh Hello Easter Card
This card uses stamps from the new 'Oh Hello' stamp set. The egg (which is a punched extra large oval shape) is stamped with the patterned chervon stamp and the coloured flowers are with the flower stamp. Both stamps are coloured using a variety of marker pens. No ink pads used here. The chick is made from my favourite punch, the two step bird punch and the wing is the top section of the bitty butterfly punch.

God Bless You Card
I have been wanting to try out making a cross with my modern label punch for ages and finally sat down and did it. I am very happy with how it turned out. I think this card could easily be adapted to turn it into a baptism card or a sympathy card. The background on this card uses a technique called bouncing brayer. This is where you ink up the brayer (solid rubber roller) and instead of rolling ink on you bounce it on moving it around in a circular motion. One end of the brayer stays pretty much in the same spot and the other end moves around the 'circle'.

Next posting I will have some more ideas for using a brayer.
Until then... Rhonda

 

Baby Cards

Attention: open in a new window. E-mail

Saturday, 09 March 2013

A New Zealand Icon
This Buzzy Bee card was made with a child's first birthday in mind. It uses stamps from the new 'Oh, Hello' Stamp set.

Baby Bottle Punch Art
I was playing around with my punches trying to make up some new baby cards and was very happy with how this bottle turned out. Very easy in the end. It uses the two tag die, ticket duo builder punch, owl builder punch and word window punch.

It's a girl!
Same punch art in pink...

From Rhonda

 

Ladybug Punch Art

Attention: open in a new window. E-mail

Tuesday, 26 February 2013

I have some mini wooden pegs with a ladybug on top, and they became my inspiration this week for some small gifts ideas for my customers...

Tags
These ladybug tags were made for my customers who came to the Tauranga Extravaganza on Sunday. The little lady bug is made using the small oval punch, 1/2" circle punch and the tiny circles from the two step owl punch.

Tissue Holders
These gift boxes can be pulled up by the ribbon to reveal a pack of tissues inside.

Notepads
I made the notepad on the right using Pacific Point card but then decided to decorate pens to match so I dug out my retired Stampin' Up! card and was delighted to find the old Brilliant Blue (on left) a perfect match for the pens.

Pens
These were cheap pens brought from K Mart in a pack of 12 (called Office One). They have an end that can be unscrewed which means you can inset a roll of designer series paper in the barrel.

 

I used a knitting needle to curl the paper. Curl into a roll from the long sides (not the short ends). My paper measured 2cm x 11cm.

Thanks for visiting and thanks for the comments. I always enjoy reading them!
From Rhonda

 

Page 6 of 18

Stamped images on this website are copyright © 1990-2014 Stampin' Up!® unless otherwise stated. All content,
including text, photos and designs, are copyright Rhonda Fawcett unless otherwise stated.
Website developed by Stephen McNickle